Welcome to the Invelos forums. Please read the forum rules before posting.

Read access to our public forums is open to everyone. To post messages, a free registration is required.

If you have an Invelos account, sign in to post.

    Invelos Forums->DVD Profiler: Contribution Discussion Page: 1 2 3 4  Previous   Next
Cloning profiles
Author Message
DVD Profiler Unlimited RegistrantStar ContributorArdos
Registered: July 31, 2008
Reputation: High Rating
United Kingdom Posts: 2,506
Posted:
PM this userDirect link to this postReply with quote
Quoting RHo:
Quote:
Quoting Forget_the_Rest:
Quote:
The way I see it is that bad data is bad data is bad data & should be kept out at all costs.

Since cloning credits is not the only possible source of bad data and because we are all human and prone to errors, the only way to keep bad data out of the database at all cost, would be to remove all data.

It always depends on the cost-value ratio.


To keep out the bad data we use the voting system. Of course errors will always happen & get in. Sometimes from initial contributions where no one votes, some times from profiles that no one has voted on, sometimes again due to human error. However to not even bother checking at all if the data you're copying is accurate is just asking for trouble.
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
Quoting Forget_the_Rest:
Quote:
Quoting RHo:
Quote:
Quoting Forget_the_Rest:
Quote:
The way I see it is that bad data is bad data is bad data & should be kept out at all costs.

Since cloning credits is not the only possible source of bad data and because we are all human and prone to errors, the only way to keep bad data out of the database at all cost, would be to remove all data.

It always depends on the cost-value ratio.


To keep out the bad data we use the voting system. Of course errors will always happen & get in. Sometimes from initial contributions where no one votes, some times from profiles that no one has voted on, sometimes again due to human error. However to not even bother checking at all if the data you're copying is accurate is just asking for trouble.

ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
Rho:

I will be happy to explain to one and all  that when I started to design the Rules I tried very hard with DanW to keep that cost-benefit as close to neutral as humanly possible, because I do understand the premise. But when users start whining about their cost-benefit versus the cost-benefit of another user then we are not in neutral territory are we.

Such as I am lazy I don't want to spend two hours building a Profile and i don't care if the data is correct or accurate or even if it conforms to the Rules, Ken has made statements which allow me to be lazy, then his garbage negatively impacts users who genuinely working for the benefit of the Community and trying to build an accurate database as defined by the Rules and the ACTUAL data that is needed.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar ContributorRHo
Registered: March 13, 2007
Posts: 2,759
Posted:
PM this userDirect link to this postReply with quote
Quoting Forget_the_Rest:
Quote:
Quoting RHo:
Quote:
Quoting Forget_the_Rest:
Quote:
The way I see it is that bad data is bad data is bad data & should be kept out at all costs.

Since cloning credits is not the only possible source of bad data and because we are all human and prone to errors, the only way to keep bad data out of the database at all cost, would be to remove all data.

It always depends on the cost-value ratio.

To keep out the bad data we use the voting system. Of course errors will always happen & get in. Sometimes from initial contributions where no one votes, some times from profiles that no one has voted on, sometimes again due to human error. However to not even bother checking at all if the data you're copying is accurate is just asking for trouble.

I agree, but I also wanted to comment your "at all cost".
For me, spot checking a cloned credit list would be reasonable cost-value wise.
DVD Profiler Unlimited RegistrantStar Contributorwhispering
On ne passe pas!
Registered: March 13, 2007
Finland Posts: 1,380
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
Quoting Unicus69:
Quote:
And this is where the problem is.  What is best for the db and the users is highly subjective and is the primary reason we have rules.  What you think is good for thedb, may not be what someone else thinks is good for the db.  What is good for you, may not be good for someone else.

It is unfortunate that the invelos screeners do not enforce the rules.  If that is going to be the SOP, why have rules at all? 


...and i think that is the million dollar question, what is the good for the DB? In my opinion its a compromise, always. When we are talking about users having no cast/crew and users getting false results from CLT. Then which do you think serves the community more; The possibilty that a profile is wrong (which were not talking about adding to the database) and thus giving false results on the CLT or the reality that there are no credits?

I'm not saying we should abandon the rules ...and i'm not saying i'm braking the rules. I honestly believe i am following the rules.
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
That depends on the extent of the spot-checking, Rho. But in principle I see where you are going. Spiot-checking like so many other things becomes a value judgement, which no two users will see the same way and it becomes another encouragement to all of our inherent bent to laziness. If you are spot checking to merely determine that the order of crediting is likely correct, you may be overlooking bad data, THat would be one thing of course to watch for, roles would be another, and some obvious name handling or parsing issues would be yet another,for example if the cloned profile has a Jon Jones Jr. look at the ACTUAL credit.

But i would say spot-checking only do so with caution, again it comes down to your time versus the time of those who expend the effort.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
Quoting whispering:
Quote:
Quoting Unicus69:
Quote:
And this is where the problem is.  What is best for the db and the users is highly subjective and is the primary reason we have rules.  What you think is good for thedb, may not be what someone else thinks is good for the db.  What is good for you, may not be good for someone else.

It is unfortunate that the invelos screeners do not enforce the rules.  If that is going to be the SOP, why have rules at all? 


...and i think that is the million dollar question, what is the good for the DB? In my opinion its a compromise, always. When we are talking about users having no cast/crew and users getting false results from CLT. Then which do you think serves the community more; The possibilty that a profile is wrong (which were not talking about adding to the database) and thus giving false results on the CLT or the reality that there are no credits?

I'm not saying we should abandon the rules ...and i'm not saying i'm braking the rules. I honestly believe i am following the rules.

You may not say you are breaking the Rules...but I will. And no your approach is totally unacceptable, for you to clone data without verifying it, you are in essence putting your time above those users, myself included, who do take the ACTUAL effort of building profiles and making sure that they conform to the rules, I don't need the data of such users or even want to see it approved EVER. It takes far less time to verify that the cloned data is correct than it does to build a Profile from scartch. But your comments are all completely self-serving and not in the interest of the Community. Sorry, whispering, that is the way i see it and I will say that unwaveringly and consistently.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
I may be human and i may make mistakes, typos. But I will NEVER consider my time and effort to be more valuable than someone else's. Nor will you EVER see my trying desperately to take advantage of ANY comment bu Ken or any alleged weakness in the Rules to to further weaken the overall system for everyone else. ALL of my data will ALWAYS be to the Rules AND verified and documented. I would prefer to see a small handful of users from each Region/Locality doing this as opposed to 10,000 users all looking for ways to suborn the Rules or create shortcuts, refusing to verify annd document their work and as a result entering bad data in to the system.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar ContributorKulju
Registered: March 14, 2007
Finland Posts: 2,337
Posted:
PM this userView this user's DVD collectionDirect link to this postReply with quote
After reading these same "conversations" over and over and over again, it just makes me more convinced that THE most important thing for this software, would be separate profiles for the Film content and DVD content.

Then there would be only one "master" profile which all users would vote/audit, no matter which locality of DVD they have. At the moment we just have bad database design.

Design should contain parallel profiles, master and local for Cast & Crew. User should be able to define if one would like to use only master or local or combination of both, where local would be appended to master.

Examples:

1. Cast & Crew on DVD matches with master profile = use only master

2. Cast & Crew on DVD doesn't match with master profile = use only local (I think Blade Runner have at least two different end credits)

3. Cast & Crew matches with master, but has more credits = user local appended to master (for example animations which also have local voice actors credited after original voices).

Primary key for master profile should be combination of Original Title, Production Year and Director. We could use present Cast & Crew fields for local Cast & Crew and Ken could add a new set of fields for master.

I really hope we would see this at least on ver. 4.0 since it would rise the accuracy and useability of this db to a whole new level. Same time it would end these endless debates on forums.

CLT should only be effected by master profile contributions.

By local I don't mean local as we understand it now, I mean Cast & Crew that is tied to certain UPC. That data should also be contributable.
 Last edited: by Kulju
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
What woud be the origin of this alleged Master profile, he who gets there first even if its garbage. Or should it be based somehow on the release...but which release.

I am afraid knowing the vagaries of film producers, that I don't see a rise in either accuracy OR in useability based on your concept. Not sure, but my initial suspicion would be precisely the opposite on both counts.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
 Last edited: by Winston Smith
DVD Profiler Unlimited RegistrantStar ContributorArdos
Registered: July 31, 2008
Reputation: High Rating
United Kingdom Posts: 2,506
Posted:
PM this userDirect link to this postReply with quote
Although I would love to see a safe way of linking cast/crew profiles together, I think the way that you're suggesting would complicate matters for people -

Do it this way if you have this release.
Do it that way if you have that release.
Do it another way if you have another release.

We have enough trouble agreeing on the system as it currently is. I think adding in more variables would be a headache.
DVD Profiler Unlimited RegistrantStar ContributorWinston Smith
Don't be discommodious
Registered: March 13, 2007
United States Posts: 21,610
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
I have said  many times that over the years I have NEVER had any problem entering data that conforms with the Rules, it odes take time, but it has never been a problem, Hollywood can be aproblem but that's another story and issue entirely.

I REALLY believe that if people will listen, instead of wanting to argue and subvert the Rules, or wanting to create shortcuts which do benefit anyone and sometimes only causes more work for someone else that all of us will be far better off for it, it just isn't that hard to do.

Skip
ASSUME NOTHING!!!!!!
CBE, MBE, MoA and proud of it.
Outta here

Billy Video
DVD Profiler Unlimited RegistrantStar Contributorwhispering
On ne passe pas!
Registered: March 13, 2007
Finland Posts: 1,380
Posted:
PM this userEmail this userView this user's DVD collectionDirect link to this postReply with quote
Quoting Kulju:
Quote:
After reading these same "conversations" over and over and over again, it just makes me more convinced that THE most important thing for this software, would be separate profiles for the Film content and DVD content.

Then there would be only one "master" profile which all users would vote/audit, no matter which locality of DVD they have. At the moment we just have bad database design.

Design should contain parallel profiles, master and local for Cast & Crew. User should be able to define if one would like to use only master or local or combination of both, where local would be appended to master.

Examples:

1. Cast & Crew on DVD matches with master profile = use only master

2. Cast & Crew on DVD doesn't match with master profile = use only local (I think Blade Runner have at least two different end credits)

3. Cast & Crew matches with master, but has more credits = user local appended to master (for example animations which also have local voice actors credited after original voices).

Primary key for master profile should be combination of Original Title, Production Year and Director. We could use present Cast & Crew fields for local Cast & Crew and Ken could add a new set of fields for master.

I really hope we would see this at least on ver. 4.0 since it would rise the accuracy and useability of this db to a whole new level. Same time it would end these endless debates on forums.

CLT should only be effected by master profile contributions.

By local I don't mean local as we understand it now, I mean Cast & Crew that is tied to certain UPC. That data should also be contributable.


Couldnt agree more.
DVD Profiler Unlimited RegistrantStar ContributorKulju
Registered: March 14, 2007
Finland Posts: 2,337
Posted:
PM this userView this user's DVD collectionDirect link to this postReply with quote
Quoting Dr Pavlov:
Quote:
What woud be the origin of this alleged Master profile, he who gets there first even if its garbage. Or should it be based somehow on the release...but which release.


It doesn't matter who does the initial contribution and which release he would use as a source as long as it would follow the present contribution rules and the UPC where he has taken that info is mentioned in contribution notes.

At that point steps in the community and votes if their release has a same or different data. "Master" profile would contain "most credited data" which I think would match in 99% of cases. You have  been here awhile as have I, and we both have seen these arguments about execptions several times, but I remember around five of them, out of thousands and thousands profiles.

I'm by no means database expert but I do know that well designed db has same data written only once. How to implement the best way to handle execptions? I think that these forums has people who has better ideas than mine, but any way other than present would be better.

Quote:
I am afraid knowing the vagaries of film producers, that I don't see a rise in either accuracy OR in useability based on your concept. Not sure, but my initial suspicion would be precisely the opposite on both counts.


And I believe you are wrong.
DVD Profiler Unlimited RegistrantStar ContributorDragon 6
Registered: 2/18/2003
Registered: March 29, 2007
Posts: 281
Posted:
PM this userDirect link to this postReply with quote
verifying the accuracy. If we are cloning another profile we need to verify the data against our own disc to make sure everything is correct before we contribute. The rules even state that we need to verify all data before contributing and reading the contribution notes of the cloned profile is not verifying anything. If we continue to clone profiles without verifying the info against our own disc, than we are allowing the possibility of adding more corrupted data to the system. This kind of action will not help the CLT but only make it worse.
DVD Profiler Desktop and Mobile RegistrantStar Contributorcmaeditor
Registered: April 14, 2007
United States Posts: 433
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Quoting Dragon 6:
Quote:
verifying the accuracy. If we are cloning another profile we need to verify the data against our own disc to make sure everything is correct before we contribute. The rules even state that we need to verify all data before contributing and reading the contribution notes of the cloned profile is not verifying anything. If we continue to clone profiles without verifying the info against our own disc, than we are allowing the possibility of adding more corrupted data to the system. This kind of action will not help the CLT but only make it worse.


Correct. I just went through Star Trek: The Original Series: Season Three: Remastered Edition, and ended up having to do a full audit of the Cast and Crew info (that had been submitted by copying from another approved profile), when I was just planning to update the Crew data for 3.5. What I found were instances of incorrect directing and writing credits (duplicates of the previous episodes credits), and some role names that were clearly not taken from the screen credits as the spelling was not close to what was on the screen.
Chris
    Invelos Forums->DVD Profiler: Contribution Discussion Page: 1 2 3 4  Previous   Next